RIGGING KIT 1 – SINGLE TREE BRANCH

£236

Intended for single tree branches or any installation where you will be wrapping around an anchor point. This kit can also used for securing around a steel or wood structural beam when the side bracket kit is not desirable.

Description

Intended for single tree branches or any installation where you will be wrapping around an anchor point. This kit can also used for securing around a steel or wood structural beam when the side bracket kit is not desirable.

Includes:

  • Oversized Polyester Tree Sling
  • Oversized Outdoor Galvanized Shackle
  • Commercial Outdoor-Grade Polyester Rope with Marine-Grade 316 Stainless Steel thimbles.
  • Marine Grade 316 Stainless Steel Quick Link
  • Technical Design support to make sure you have exactly what you need. If you don’t have measurements – no problem, we are here to help.

 

Tree slings are used to wrap around tree trunks and branches in a choker configuration. Our tree slings are oversized to reduce the impact on the tree. All slings have an abrasion resistant sleeve that protects the sling and the tree.

  • Heavy Duty polyester fibre core with abrasion protection sleeve
  • Polyester will not degrade in UV or wet environments
  • Load Rating – 4,200 lbs (choker pull)

Our Heavy Duty hanging brackets are designed to mount on the side of wood beams or concrete ceilings. Welded, made of steel plate, steel alloy round ring, and marine-grade 316 Stainless Steel.

  • Wood Bracket dimensions – 4″ wide x 7″ tall x 3/8″ thick.
  • Mounting ring extends approximately 2″ below bottom of bracket and includes (6) Simpson® SDS heavy-duty connector screws.
  • Concrete Bracket uses (3) anchoring points to ensure concrete integrity.
  • Both brackets use double layer powder coating.

Used in our 2 Tree systems, wire ropes span between trees to create a hanging point unrestrained by branch location. Use either one rope from tree to tree, or two or more ropes between several trees.

  • 3/8″ diameter galvanized 6×25 wire rope
  • Thimbles and swaged on both ends
  • Working Load Limit – 2,800 lbs (in-line pull)
  • Material: Galvanized Steel

Our recommended zome hanging rope is a 5/8″ diameter black polyester protective braid over a core of polyester filament. This double-braided 100% polyester rope offers excellent grip, long wear-life and low stretch. Extremely flexible, very strong, and excellent against UV and moisture. Includes (2) marine grade 316 Stainless Steel thimbles to reduce wear and tear on rope eyes.

  • Working Load Limit: 1571 lbs.
  • Rope is shipped with one knot tied w/ thimble. The other end is free with instructions for a second knot, to ensure accurate length for your site.

Just your basic workhorse of a shackle. Tried and true for over 100 years.

  • This shackle is ideal for outdoor use.
  • 1/2″ Screw Pin Anchor Shackle – Hot dipped galvanized.
  • Working Load Limit – 4000 lbs

Marine grade 316 Stainless Steel Long Quick Link. Again, another workhorse of a rigging component – tried and true to secure your hanging zome lounger.

 

  • Working Load Limit: 4,800 lbs.

We offer FREE Mainland UK Delivery on all orders

Please contact us if you have any problems with the quality of your product or delivery service.

There are no reviews yet.

Be the first to review “RIGGING KIT 1 – SINGLE TREE BRANCH”

Your email address will not be published. Required fields are marked *